姓名:

李佩栋

性别:

出生年月:

1989.11

学位:

博士

职称:

副教授、博士生导师

电子邮箱:

lipeidongde@163.com;peidongli@scu.edu.cn

通讯地址:

澳门永利唯一网址力学系

邮编:

610065

【个人描述】

副教授、博士生导师,从事固体力学相关的科研与教学工作。从解析理论与数值分析的角度出发,研究热-电-磁-力等多物理场耦合下材料/结构的变形、损伤、断裂、接触、疲劳等基本力学行为,所涉及的材料包括:多孔介质、准晶、电磁等材料。在Int J Solids Struct,Int J Rock Mech Min Sci,Mech Mater,Int J Mech Sci,Eng Fract Mech,Smart Mater Struct等国际期刊上发表SCI论文28篇。

【学习及工作经历】

1、2021.09—至今,四川大学,建筑与环境学院力学系,副教授、博士生导师

2、2019.11—2020.12,新加坡南洋理工大学,博士后

3、2018.01—2021.08,四川大学,建筑与环境学院力学系,助理研究员、副研究员(专职博士后)

4、2016.10—2016.11,英国诺丁汉大学,访学

5、2013.09—2017.12,西南交通大学,固体力学,博士

6、2011.09—2013.07,西南交通大学,固体力学,硕士

7、2007.09—2011.06,兰州大学,理论与应用力学,本科

【承担的主要课程】

本科生:连续介质力学、张量与泛函、复合材料力学、学术研讨

研究生:近代连续介质力学

主讲《连续介质力学》线上慕课:https://www.xuetangx.com/course/scu08011006529/12032617

【主要研究领域】

1、损伤与断裂力学

2、接触力学与摩擦学

3、失效分析与工程可靠性

【主持或参与的科研项目】

主持的项目:

1、国家自然科学基金面上项目(12172237),基于相场法的准晶体裂纹扩展及破坏机理研究,主持

2、国家自然科学基金青年项目(11802189),热-机械载荷下准晶体中多重平面裂纹交互影响的三维分析,主持

3、四川省科技厅基础研究项目(2021YJ0513-BG),热-电-力耦合下准晶压电材料的力学性能及失效原理研究,主持

4、中国博士后特别资助项目(2020T130444),面向等离子体多晶钨辐照损伤与断裂机理及相场模拟,主持

5、中国博士后面上项目(2018M643468),热-力耦合条件下准晶接触问题的三维分析,主持

6、教育部重点实验室开放基金(DUSE201806),考虑热效应的各向异性多孔介质裂纹问题三维解析研究,主持

7、中央高校基本科研业务费-专职博士后研发基金(2019SCU12051),各向异性材料粗糙界面黏附接触力学行为研究,主持

8、中央高校基本科研业务费-国家自然基金培育专项,准晶压电材料的损伤与失效机理及相场模拟,主持

参与的项目:

1、国家自然科学基金面上项目(11872259),高温超高周微动疲劳激光熔覆表面强化效应研究,主研

2、国家自然科学基金面上项目(12072211),镁合金中锥面位错激活机制与增韧的多尺度研究,主研

3、国家自然科学基金面上项目(11672250),热-机械荷载作用下准晶体中剪切模态平面裂纹的三维分析,主研

【代表性论著】

1.Li PD*, Liu YW, Zhang SH, Shao BM, Fan HD, Wang QY*. Adhesive contact of a one-dimensional hexagonal quasicrystal half-space punched by a spherical indenter.Acta Mechanica Solida Sinica(2022).

2.LiDY,Li PD, Li WD, Li WG*, Zhou K*. Three-dimensional phase-field modeling of temperature-dependent thermal shock-induced fracture in ceramic materials.Engineering Fracture Mechanics(2022) 268: 108444.

3.LiB,Li PD, Zhou RH, Feng XQ, Zhou K*,Contact mechanics in tribological and contact damage-related problems: A review.Tribology International(2022) 171:107534.

4.Liu YW, Tang XS, Duan PL, Wang T,Li PD*. Three-dimensional thermo-electro-elastic field in one-dimensional hexagonal piezoelectric quasi-crystal weakened by an elliptical crack.Mathematics and Mechanics of Solids(2021) 27(7): 1233-1254.

5.Li PD, Li DY, Wang QY, Zhou K*. Phase-field modeling of hydro-thermally induced fracture in thermo-poroelastic media.Engineering Fracture Mechanics254 (2021) 107887.

6.Li PD*, Fan HD, Wang M, Zhou K, Wang QY*. A closed-form solution for the 3D steady-state thermoporoelastic field in an infinite transversely isotropic rock weakened by an elliptical crack.International Journal of Rock Mechanics and Mining Sciences129 (2020) 104292.

7.LiPD, Zhang H, Wang QY, Shao BM*, Fan HD*. Effect of temperature on the performance of laterally constrained dielectric elastomer actuators with failure modes.Journal of Applied Polymer Science. 2020, 137(35): 49037.

8.Li PD*, Zhou M, Wang QY*, Indentation on a one-dimensional hexagonal quasi-crystal half-space by an elliptic indenter.Meccanica2019, 54: 1225-1243.

9.Li PD, Liu YJ, Zhang H, Wang QY*, Indentation on a half-infinite one-dimensional hexagonal quasi-crystal space by a rigid flat-ended cylindrical indenter with uniform heat flux or temperature.Mechanics of Materials2019, 131: 33-46.

10.Li PD, Li XY*, Kang GZ, Axisymmetric thermo-elastic field in an infinite one-dimensional hexagonal quasi-crystal space containing a penny-shaped crack under anti-symmetric heat fluxes.Engineering Fracture Mechanics190 (2018) 74-92.

11.Li PD, Li XY*, Kang GZ, Müller R, Electric and magnetic polarization saturations for a thermally loaded penny-shaped crack in a magneto-electro-thermo-elastic medium.Smart Materials and Structures26 (2017) 095049 (15pp).

12.Li PD,Li XY*, Kang GZ, Müller R, Three-dimensional fundamental solution of a penny-shaped crack in an infinite thermo-magneto-electro-elastic medium with transverse isotropy.International Journal of Mechanical Sciences2017, 130: 203-220.

13.Li PD, Li XY*, Kang GZ, Gao CF, Müller R, Crack tip electric polarization saturation of a thermally loaded penny-shaped crack in an infinite thermo-piezo-elastic medium.International Journal of Solids and Structures, 2017, 117: 67-79.

14.Li PD, Li XY*, Kang GZ, Axisymmetric thermo-elastic field in an infinite space containing a penny shaped crack under a pair of symmetric uniform heat fluxes and its applications.International Journal of Mechanical Sciences, 2016, 115-116: 634-644.

15.Li PD, Li XY*, Zheng RF, Thermo-elastic Green’s functions for an infinite bi-material of one-dimensional hexagonal quasicrystals.Physics Letters A, 2013, 377: 637-642.

16.Li PD, Li XY*, Wang T, Three-dimensional thermo-electro-elastic field in a circular plate of functional graded materials with transverse isotropy.Mechanics of Advanced Materials and Structures, 2015, 22: 537-547.

17.Li PD, Li XY*, Kang GZ, Crack tip plasticity of a half-infinite Dugdale crack embedded in an infinite space of one-dimensional hexagonal quasicrystal.Mechanics Research Communications, 2015, 70, 72-78.

18.Li XY*,Li PD, Kang GZ, Chen WQ, Müller R, Steady-state thermo-elastic field in an infinite medium weakened by a penny-shaped crack: Complete and exact solutions.International Journal of Solids and Structures, 2016, 84, 167-182.

19.Zhang H,Li PD, Gong XF, Wang TJ, Li L, Liu YJ, Wang QY. Tensile properties, strain rate sensitivity and failure mechanism of single crystal superalloys CMSX-4.Materials Science and Engineering A782 (2020) 139105

20.Zhang H*,Li PD, Wang QY, Guan ZW, Liu YJ*, Gong XF. Electron beam welding of nimonic 80A superalloy: microstructure evolution and EBSD study after aging heat treatment.Journal of Materials Engineering and Performance, (2019) 28: 741-752.

21.Zhang H,Li PD, Wang QY*, Liu YJ*, Fatigue crack propagation of nickel-based superalloy: Experiments and simulations with extended finite element method.Journal of Materials Engineering and Performance, (2019) 28: 967-972.

22.Li XY*,Li PD, Kang GZ, Crack tip plasticity of a thermally loaded penny-shaped crack in an infinite space of 1D QC.Acta Mechanica Solida Sinica, 2015, 28, 471-483.

23.Li XY*,Li PD, Three-dimensional thermo-elastic general solutions of one-dimensional hexagonal quasi-crystal and fundamental solutions.Physics Letters A, 2012, 376: 2004-2009.

24.Li XY*,Li PD, Wu TH, Shi MX, Zhu ZW, Three-dimensional fundamental solutions for one dimensional hexagonal quasicrystal with piezoelectric effect.Physics Letters A, 2014, 378: 826-834.

25.Li XY*,Li PD, Kang GZ, Pan DZ, Axisymmetric thermo-elasticity field in a functionally graded circular plate of transversely isotropic material.Mathematics and Mechanics of Solids, 2012, 18: 464-475.

26.Wang ZP, Wang T,Li PD, Li XY*, Chen WQ, Müller R, Three-dimensional fundamental thermo-elastic solutions applied to contact problems.Journal of Applied Physics, 2016, 120, 174904.

27.Li XY*, Wang YW,Li PD, Kang GZ, Müller R, Three-dimensional fundamental thermo-elastic field in an infinite space of two-dimensional hexagonal quasi-crystal with a penny-shaped/half-infinite plane crack.Theoretical and Applied Fracture Mechanics88 (2017) 18-30.

28.Li XY, Ding HJ, Chen WQ,Li PD, Three-dimensional piezoelectricity solutions for uniformly loaded circular plates of functionally graded piezoelectric materials with transverse isotropy.ASME Journal of Applied Mechanics, 2013, 80: 0410071-12.

【学术兼职】

中国力学学会会员;

四川省力学学会会员;

国家自然科学基金委通讯评审专家;

获奖

1、2021.04 四川省海外高层次留学人才

2、2019.01西南交通大学优秀博士毕业论文

3、2017.01 四川省优秀博士毕业生;

4、2016/2014/2013 博士/硕士研究生国家奖学金;

5、2014.12 西南交通大学博士研究生拔尖创新人才支持计划;

关闭

招聘信息 | 学院介绍 | 机构设置 | 师资队伍 | 科研平台 | 学科建设 | 教学评估


学院地点:成都市四川大学行政楼一楼(望江)
党政办:85405534、85408889 教育发展中心:85405613、85463775 学生工作组:85407049
成都市双流区川大路建环大楼(江安) 党政办:85990865、85999959;学生工作组:85990968
Copyright@2010-2080 acem.scu.edu.cn All Right Reserved 版权所有:澳门永利唯一网址
网站备案:蜀ICP备05006382号 邮编:610000